How-To: Install BFxenon Bi-Xenon HID lights

When installing BFxenon HID lights, for your safety, please remember to remove the battery terminal / negative lead to the battery before connecting any high voltage parts.

Click this bar to view the small image.

Step 1: Remove factory lights from the factory housing

Step 2: Install HID bulb or Locking clip (on some applications) by lining up the channel locks, pushing it into the housing, and twisting.

Click this bar to view the small image.

Step 3: Run the wiring harness to both sides for measuring purpose

Step 4: Connect the female terminals on the harness to the ballast

Click this bar to view the small image.

Step 5: Connect the small trigger wire from the harness to the bulb and the positive and negative lead off the ballast to the bulb (see step 4 for picture)

Step 6: Connect the OEM female headlight connector to the OEM style connector on the harness


Step 7: Attach the ground wire and positive battery lead, re-attach the positive battery connection and turn everything on. This is just to ensure everything lights up properly before you secure the ballasts and wires.

Click this bar to view the small image.

Click this bar to view the small image.

Step 8: Secure the HID ballast within the range of the wiring harness. Some recommended location are; firewall, cold air intake housing (if metal), radiator mounting brace, front bumper brace, etc. (Some of these may not be the best option for every vehicle)


Step 9: Secure all the loose wiring away from any moving parts and out of the way of extreme heat.

Step 10: Enjoy your BFxenon HID headlights!

For more information or suggestions on how to make these instructions better, please contact: Sales@BFxenon.com


Check your wiring:

Click this bar to view the small image.

Click this bar to view the small image.